600-850μm Electrically Molten Ceramic Blasting Abrasive B20
DESCRIPTION
600-850μm Ceramic blasting abrasive B20 is high-tech blastingmedia which are made by high quality zirconia powder as raw material, then fused in an electric furnace under high temperature over 2000 degrees, finally made into different micro beads through special technology.
ADVANTAGES
1). Ceramic sand has a specific microstructure composed of crystallized zirconia (ZrO2) embedded in a glass matrix.
①. High hardness which can effectively transfer the energy of impact point.
②. High toughness to ensure the stability of the medium through hundreds of sandblasting cycles.
③. Does not contaminate the treated surface.
④. Very little dust is produced to ensure production efficiency and limit reduce tear on the sandblasting equipment.
2). Production uses a controlled process and rigorous quality control using advanced technologies such as particle size laser diffraction and morphological image inspection.
APPLICATION
Blasting cleaning: to remove burrs, casting slag and other defects and dirt on the surface of the workpiece and also residues of the molds.
Blasting finish: to show natural metal color and achieve uniform surface matting effect.
Pretreatment: to get clean surface and frosted rough surface before Anodizing and coating.
FEATURES
Surface treatment consistency: Consistency of metallic light, the blasting strength is as good as steel balls processing effect, much higher than the glass beads strength. And can achieve adequate metal depth.
Environmental Friendly: Low crushing rate, no dust, uniform particle size, high wear resistance, re-elasticity, no hidden danger of silicosis, it is harmless to the human body.
Low equipment loss: Ceramic sand has smooth surface, high sphericity, good elasticity and low wear, can protect the equipment, whether it is dry spray or wet spray.
Product Tags:
|
|
Electrically Molten Ceramic Blasting Abrasive Media B20 600μm-850μm Images
|
